Consuming services

§Consuming services

We’ve seen how to define service descriptors and how to implement them, now we need to consume them. The service descriptor contains everything Lagom needs to know about how to invoke a service, consequently, Lagom is able to implement service descriptor interfaces for you.

§Binding a service client

The first thing necessary to consume a service is to bind it, so that Lagom can provide an implementation for your application to use. This can be done using the bindClient method on ServiceClientGuiceSupport.

import com.google.inject.AbstractModule;
import com.lightbend.lagom.javadsl.client.ServiceClientGuiceSupport;
import docs.services.HelloService;
import com.lightbend.lagom.javadsl.api.ServiceInfo;

public class Module extends AbstractModule implements ServiceClientGuiceSupport {

  protected void configure() {
    bindServiceInfo(ServiceInfo.of("hello-service"));
    bindClient(HelloService.class);
  }
}

When using a client Lagom will need a ServiceInfo implementation and use it to identify itself to the remote service. When you are developing an application that’s only implementing ServiceClientGuiceSupport to consume Lagom services you will need to invoke bindServiceInfo() and provide a ServiceInfo instance describing your app.

If you’re already binding a service implementation using ServiceGuiceSupport, this interface extends ServiceClientGuiceSupport, so your existing module can be used as is:

import com.google.inject.AbstractModule;
import com.lightbend.lagom.javadsl.server.ServiceGuiceSupport;

public class ServiceModule extends AbstractModule implements ServiceGuiceSupport {

  protected void configure() {
    bindService(HelloService.class, HelloServiceImpl.class);
    bindClient(EchoService.class);
  }
}

Note that when you bind a server using bindService, this will automatically bind a client for that service as well. So in the previous example, when we start the application there will be one service (HelloService) and two clients (HelloService and EchoService) available.

§Using a service client

Having bound the client, you can now have it injected into any Lagom component using @Inject annotations. Here’s an example of consuming one service from another service:

public class MyServiceImpl implements MyService {
  private final HelloService helloService;

  @Inject
  public MyServiceImpl(HelloService helloService) {
    this.helloService = helloService;
  }

  @Override
  public ServiceCall<NotUsed, String> sayHelloLagom() {
    return msg -> {
      CompletionStage<String> response = helloService.sayHello().invoke("Lagom");
      return response.thenApply(answer -> "Hello service said: " + answer);
    };
  }
}

§Streaming service client configuration

When using a streaming service client, Lagom will use internally a WebSocket client which has a max frame length parameter. This parameter limits the allowed maximum size for the messages flowing through the WebSocket. This can be configured in application.conf on the client-side and the default configuration is:

#This configures the websocket clients used by this service.
#This is a global configuration and it is currently not possible
#to provide different configurations if multiple websocket services
#are consumed.
lagom.client.websocket {

  #This parameter limits the allowed maximum size for the messages
  #flowing through the WebSocket. A similar limit exists on
  #the server side, see:
  #https://www.playframework.com/documentation/2.6.x/ScalaWebSockets#Configuring-WebSocket-Frame-Length
  frame.maxLength = 65536
}

This configuration will affect all streaming services that the service client consumes. It is not possible to provide different configurations when multiple streaming services are consumed.

Note that the same parameter has to be configured on the server-side using Play server configuration

§Circuit Breakers

A circuit breaker is used to provide stability and prevent cascading failures in distributed systems. These should be used in conjunction with judicious timeouts at the interfaces between services to prevent the failure of a single service from bringing down other services.

As an example, we have a web application interacting with a third-party web service. Let’s say the third-party has oversold their capacity and their database melts down under load. Assume that the database fails in such a way that it takes a very long time to hand back an error to the third-party web service. This in turn makes calls fail after a long period of time. Back to our web application, the users have noticed that their form submissions take much longer seeming to hang. The users do what they know to do which is use the refresh button, adding more requests to their already running requests. This eventually causes the failure of the web application due to resource exhaustion.

Introducing circuit breakers on the web service call would cause the requests to begin to fail-fast, letting the user know that something is wrong and that they need not refresh their request. This also confines the failure behavior to only those users that are using functionality dependent on the third-party, other users are no longer affected as there is no resource exhaustion. Circuit breakers can also allow savvy developers to mark portions of the site that use the functionality unavailable, or perhaps show some cached content as appropriate while the breaker is open.

A circuit breaker has 3 states:

During normal operation, a circuit breaker is in the Closed state:

  • Exceptions or calls exceeding the configured call-timeout increment a failure counter
  • Successes reset the failure count to zero
  • When the failure counter reaches a max-failures count, the breaker is tripped into Open state

While in Open state:

  • All calls fail-fast with a CircuitBreakerOpenException
  • After the configured reset-timeout, the circuit breaker enters a Half-Open state

In Half-Open state:

  • The first call attempted is allowed through without failing fast
  • All other calls fail-fast with an exception just as in Open state
  • If the first call succeeds, the breaker is reset back to Closed state
  • If the first call fails, the breaker is tripped again into the Open state for another full resetTimeout

All service calls with Lagom service clients are by default using circuit breakers. Circuit Breakers are used and configured on the client side, but the granularity and configuration identifiers are defined by the service provider. By default, one circuit breaker instance is used for all calls (methods) to another service. It is possible to set a unique circuit breaker identifier for each method to use a separate circuit breaker instance for each method. It is also possible to group related methods by using the same identifier on several methods.

@Override
default Descriptor descriptor() {
  return named("hello")
      .withCalls(
          namedCall("hi", this::sayHi),
          namedCall("hiAgain", this::hiAgain)
              .withCircuitBreaker(CircuitBreaker.identifiedBy("hello2")));
}

In the above example the default identifier is used for the sayHi method, since no specific identifier is given. The default identifier is the same as the service name, i.e. "hello" in this example. The hiAgain method will use another circuit breaker instance, since "hello2" is specified as circuit breaker identifier.

See CircuitBreakerPanel recipe for an example you can use with any arbitrary API to apply the circuit breaker pattern.

§Circuit Breaker Configuration

On the client side you can configure the circuit breakers. The default configuration is:

# Circuit breakers for calls to other services are configured
# in this section. A child configuration section with the same
# name as the circuit breaker identifier will be used, with fallback
# to the `lagom.circuit-breaker.default` section.
lagom.circuit-breaker {

  # Default configuration that is used if a configuration section
  # with the circuit breaker identifier is not defined.
  default {
    # Possibility to disable a given circuit breaker.
    enabled = on

    # Number of failures before opening the circuit.
    max-failures = 10

    # Duration of time after which to consider a call a failure.
    call-timeout = 10s

    # Duration of time in open state after which to attempt to close
    # the circuit, by first entering the half-open state.
    reset-timeout = 15s

    # A whitelist of fqcn of Exceptions that the CircuitBreaker
    # should not consider failures. By default all exceptions are
    # considered failures.
    exception-whitelist = []
  }
}

That configuration will be used if you don’t define any configuration yourself. The settings to configure a circuit breaker include the general settings you’d expect in a circuit breaker like the number of failures or the request timeout that should open the circuit as well as the timeout that must lapse to close the circuit again. In lagom there’s an extra setting to control what is considered a failure.

Lagom’s client maps all 4xx and 5xx responses to Exceptions and Lagom’s Circuit Breaker defaults to considering all Exceptions as failures. You can change the default behavior by whitelisting particular exceptions so they do not count as failures. Sometimes you want to configure the circuit breaker for a given endpoint so it ignores a certain exception. This is particularly useful when connecting to services where 4xx HTTP status codes are used to model business valid cases. For example, it may be a non-failure case to respond a 404 Not Found to a particular request. In that case you can add "com.lightbend.lagom.javadsl.api.transport.NotFound" to the circuit breaker whitelist so that it is not considered a failure. Even if the NotFound exception is not counted as a failure, the client will still throw a NotFound exception as a result of invoking the service.

With the above “hello” example we could adjust the configuration by defining properties in application.conf such as:

lagom.circuit-breaker {

  # will be used by sayHi method
  hello.max-failures = 5

  # will be used by hiAgain method
  hello2 {
    max-failures = 7
    reset-timeout = 30s
  }

  # Change the default call-timeout
  # will be used for both sayHi and hiAgain methods
  default.call-timeout = 5s
}

Lightbend Monitoring will provide metrics for Lagom circuit breakers, including aggregated views of the information for all nodes in the cluster.

Found an error in this documentation? The source code for this page can be found here. Please feel free to edit and contribute a pull request.